- MyWatch.gr - The Hellenic Wrist & Pocket Watch Enthusiasts Forum / Founded in March 2006
Νέα από την Ωρολογοβιομηχανία & Εκθέσεις εντός και εκτός Ελλάδος => Νέα & Ειδήσεις από την Ωρολογοβιομηχανία => Μήνυμα ξεκίνησε από: george_ στις Ιούλιος 13, 2009, 12:25:42 μμ
-
On the UR-CC1, two horizontal lines. Two cylinders - one for hours, the other for minutes. Do not misunderstand the apparent simplicity of such a display. He required more than three years of development and will require three years of production.
Came a triple and a vertical toothed segment (visible on the edge of the UR-CC1) provide the rotation of the cylinder minutes.
The minutes of the cylinder makes a 300 ° rotation from zero to sixty minutes. Arriving at the marker for 60 minutes, the cylinder is returned to its original position in 1/10th of a second end by an apparent extra-flat. This movement causes retrograde minutes the progress of the cylinder of hours a unit.
The triple came is done in bronze beryllium, a metal known for its self and its low coefficient of friction. It takes the form of three mini-triangles slope aigue. The triple came ensures trajectory segment toothed cylinder connected to the minutes.
The triple came performs a complete rotation in three hours, each came to the rotation of the cylinder minute marker 0 to 60minutes.
One hundred and four reference points were calculated to determine the perfect angle for each of the three cams.
The toothed segment connects to the cam cylinder minutes. It has two properties at first sight contradictory. It must be perfectly rigid in order to convey accurately the movement of the triple cylinder came minutes and extremely light in order to consume the least energy possible.
This significant piece was completed by the house Mimotec through its new photolithographic process. Carried out in silicon, it has a honeycomb him to meet the harsh conditions and extreme lightness.
the face of the UR-CC1 is animated, the world premiere of a second digital. It displays the even numbers of seconds. To achieve this technique, the part has been machined silicon Mimotec by the company.
The UR-CC1 enjoys art pneumatic brake of the brake rotor fly ", a propeller attached to the rotor of the watch. This system protects the system of automatic shocks too violent and better longevity of the piece. The brake rotor fly "is apparent on the side of the UR-CC1.
(http://img8.imageshack.us/img8/496/urcc1kingcobra.jpg) (http://img8.imageshack.us/i/urcc1kingcobra.jpg/)
(http://img11.imageshack.us/img11/3864/urcc1kingcobramvt.jpg) (http://img11.imageshack.us/i/urcc1kingcobramvt.jpg/)
-
Φιλε μου george τι ακριβως ειναι αυτο :o :o ??? ???
Φιλικα
Ser
-
Πραγματικα τρομερη τεχνολογια.Μπειτε στο σαιτ της URWERK για περισσοτερα!
-
Στη πρώτη φωτό δεν σας θυμίζει κοντέρ ή ....ραδιόφωνο αυτοκινήτου του '60-'70?? ;D
Ο Χριστός, η Παναγία και οι 12 Απόστολοι!!!
-
Αν ειχε και μοχλο στο πλαι θα εφερνε σε <κουλοχερη>,οσο για την τεχνολογια σαφως :respect:
-
Αν ειχε και μοχλο στο πλαι θα εφερνε σε <κουλοχερη>,οσο για την τεχνολογια σαφως :respect:
Σωστός!! Μόνο που αυτός ο "κουλοχέρης" δεν υπάρχει ούτε μισή πιθανότητα στα τρισεκατομμύρια να σου βγάλει κέρματα. Μόνο να "βάλεις"..... :D